fire alarm testing, systems, smoke detectors, inspection, fire alarms, devices, fire protection, safety

Common Fire Code Violations and How to Avoid Them

ROS Electric has been helping customers resolve their fire code violations for over 30 years! Our experienced staff can evaluate your situation, figure out how to remedy it, and assist in the correction. We will work with the Federal, State, or Local Agency responsible for the issuance of the violation until it has been abated. Keep reading to learn about some of the fire code violations more in-depth!

fire security, fire alarm testing

Fire Code Violations

Annual Testing Violations

If you don’t upkeep with annual testing, there is an abundance of violations you could get caught with. Thus, be sure to test your fire alarm/system, emergency lights, and exit signs, and run a fire alarm report annually. Schedule an appointment with ROS Electric to have these tests out of the way!

Windowless Basement Violations

A basement is considered windowless if any part of the basement is located more than 75 feet from the window openings. If at least one side provides access for the firefighters, it is not considered windowless. 

When it comes to fire code violations in a windowless basement, the size of the basement plays a big factor. Fire suppression regulations exempt basements that are under 3,000 square feet from the automatic suppression requirement, but an automatic fire alarm system is required to be installed per New Jersey Uniform Construction Code.

However, a basement that exceeds 3,000 square feet must have a fire suppression system and an automatic fire alarm system installed. To achieve this, a supervised fire suppression system can be installed to cover the need of both systems, but it must be covered by one of the following per the Windowless Basement Law:

  • A central station monitoring system
  • An approved proprietary system
  • An approved remote station system
  • An approved local alarm service connected to a local fire station

Uniform Fire Code Violations

The New Jersey Administrative Code provides heavy fines for failing to install a required fire detection or suppression device after receiving a written notice to do so. Fines are:

  • $2,500 per violation per day, if it occurred in a place of public assembly or education
  • $1,000 per occurrence if occurring in any other place

The fines for disabling (or diminishing the effectiveness) of any fire alarm or fire suppression system are:

  • $5,000 per occurrence, if it occurs in a place of public assembly or education
  • $1,000 per occurrence if occurring in any other place

All of these fines are easily avoidable by maintaining your fire alarm systems or getting the violations solved immediately after notice. 

fire alarm testing, systems, smoke detectors, inspection, fire alarms, devices, fire protection, safety

Key Takeaways:

  • You should test your fire alarm/system, emergency lights, and exit signs, and run a fire alarm report annually.
  • Windowless basements below 3,000 square feet are partially exempt from fire suppression and detection requirements.
  • Fines for violating fire codes range from $1,000 to $5,000.

ROS Electric Provides Seamless Fire Alarm System Services

If you have received a fire safety code violation notice, ROS Electric can help! We provide beginning-to-end system layout consultation advice and planning, install on-code, inspect and test fire alarm systems, and more. For a list of all common fire code violations, click here. We’d love to hear about your fire safety concerns, recent code violations, or upcoming projects. Contact us to schedule a free consultation.

Write a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.